Seltz D Pond DC
-
Can the Seltz D POND DC run more than one item? Such as an ornament and filter?
Yes this is possible if you observe the flow rates of the items you intend to connect to the pump. Consult your dealer as you will need to purchase additional equipment such as a T piece and taps in order to control more than one item. -
How is the pump fitted in the pond? How is the pump fitted in a surface or "dry" situation?
All 3 models of Seltz D POND DC are fitted in the same way. The Seltz D POND DC pump is fitted with a base and rubber feet. This makes the pump easy to mount. For submerged use Hydor recommend that the pump is sat on a brick or flat stone so that the pump is approximately 20- 30 cm below the wate... -
What flow is available from the pump and what is meant by "Max Head"?
The Maximum Flow of the product is based up the flow of water as it leaves the pump. Maximum Head is where the pump is used with tubing to pump to a higher tank or piece of equipment, therefore: Seltz D POND DC 1700: Max Flow 1700 l/h, Max Head 2.1 m Seltz POND D DC 2700: Max Flow 2700 l/h, Max H... -
What is the Maintenance schedule for Seltz D POND DC series pumps?
WARNING: before any kind of intervention, always disconnect the electrical supply of the pump and any other appliance placed in the water. Hydor recommend regular cleaning and maintenance, which will guarantee the pump better and longer performance. A visual check should be done especially to the...