Koralia WiFi
-
Can I program the pump to produce different flows throughout the day?
Simply open the App and go into movement pumps at the top left. You can either pick one of the preset programs or you can make up your own program by clicking on the + icon at the top right of the page. The programmer features 24, 1 hour program slots which when clicked give you a number of diffe... -
Fault Finding : The Wifi Controller light is Blinking Blue? What does this mean?
This Blue LED signifies Network issues. The controller can’t connect to the home network. Verify that the router is turned on and working. Check also the SSID and/or PASSWORD of the home network have not changed. -
Fault Finding : The Wifi Controller light is Blinking Red & Green? What does this mean?
This Fault could be a hardware problem either the pump or controller. Please contact Contact Hydor Customer Care. -
Fault Finding : The Wifi Controller light is Blinking Red? What does this mean?
Check the Propeller is not blocked by any Aquarium debris such as Plant matter or Aquarium detritus and that the pump is completely immersed into the water. If the problem still persists, check all the connections from Koralia WiFi pump to Controller and Controller to Mains. -
Fault Finding : The Wifi Controller light is Blinking White? What does this mean?
Koralia Wifi Pump Demo Mode active! Press and hold the controller button for 2 seconds to stop the pump for 10 minutes. Press again the button to start the pump manually. After 10 minutes from the last command, the pump will return to it’s daily schedule. -
How can I load a preset program to my Koralia Wifi pump?
- iOS System First, make sure you have installed the most recent version of the Hydor app. Make sure you that your Wi-Fi network is enabled, then check that the Koralia WiFi device is connected to your tablet/smartphone. If the problem persists, reset the pump and repeat the connection setup proc... -
How do I check that my Koralia WiFi device is updated to the most recent version?
Go directly to the main menu of the Hydor app and press “Upgrading devices”. Here you will see a list of the devices you have paired. If you press “INFO” you can view all pump information, including the current firmware and the available one. If the Koralia WiFi device requires a firmware update,... -
How do I choose the right size?
Check the Flow rate table -
How do I disconnect the Koralia WiFi device from my "Home" Wifi Hub?
Unpair the Koralia WiFi device from the app: from the main menu, press “MANAGE” and select the device you wish to unpair from the list. Press the gear icon symbol for the settings of that device and press “UNPAIR DEVICE”. Press and hold the controller push button for 10 seconds. Re-pair the devi... -
How do I pause my Koralia WiFi pumps so I can feed fish and corals?
Press and hold the controller button for 2 seconds to stop the pump for 10 minutes. Press again the button to start the pump manually. -
How do I save Settings I have made on the Hydor App and save Personal Data?
Once you have created the custom programs, go to “Sync” from the main menu and press “SYNCHRONIZE”. For synchronization to be successful, your phone must have an internet connection. This way all your data, programs and paired devices will be saved on Hydor servers. If you exit from the app, upd... -
How do I Update the Koralia Wifi software?
Unpair the Koralia WiFi device from the App: from the main menu, press “MANAGE” and select the device you wish to unpair. Press the gear icon symbol for the settings of the specific device and press “UNPAIR DEVICE”. Press and hold the controller push button for 10 seconds. Now re-pair the device ... -
My Koralia Wifi Pump is attached to the Hydor App but I still can't control it. What do I do?
- iOS System First, make sure you have installed the most recent version of the Hydor app. Make sure you that your Wi-Fi network is enabled, then check that the Koralia Wifi device is connected to your tablet/smartphone. If the problem persists, reset the pump and repeat the connection setup pro... -
– Yellow: Constant flow on. – Flashing orange: wave mode on. – Purple: smooth mode on. – Green: random mode on. – Light blue: feeder mode on. – Blue: night mode on.
-
In Marine Aquariums you can use upto 10x the aquarium capacity in flow. The Koralia WiFi pump can be adjusted using the flow settings on the App from 1400-4150lph Small and 4500-10,500lph Medium.
-
What is the Cable Length on the KPS WiFi Pump?
Total length of the cable is 3,5 m (11.5 ft). From the Mains plug to the WiFi controller the length is 1,5 m (5 ft). From the WiFi controller to the KPS pump the length is 2 m (6.5 ft)